diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
index 1ce8429..6bc8eb8 100644
--- a/board/keymile/kmp204x/kmp204x.c
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -79,7 +79,7 @@
 
 
 #define ZL30158_RST	8
-#define ZL30343_RST	9
+#define BFTIC4_RST	0
 
 int board_early_init_f(void)
 {
@@ -88,13 +88,15 @@
 	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
 	setbits_be32(&gur->ddrclkdr, 0x001f000f);
 
-	/* take the Zarlinks out of reset as soon as possible */
-	qrio_prst(ZL30158_RST, false, false);
-	qrio_prst(ZL30343_RST, false, false);
+	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable WD on it */
+	qrio_wdmask(BFTIC4_RST, true);
 
-	/* and set their reset to power-up only */
-	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST);
-	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST);
+	/* set the ZL30138's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and take it out of reset as soon as possible (needed for Hooper) */
+	qrio_prst(ZL30158_RST, false, false);
 
 	return 0;
 }
@@ -127,16 +129,37 @@
 	return 66666666;
 }
 
+#define ETH_FRONT_PHY_RST	15
+#define QSFP2_RST		11
+#define QSFP1_RST		10
+#define ZL30343_RST		9
+
 int misc_init_f(void)
 {
 	/* configure QRIO pis for i2c deblocking */
 	i2c_deblock_gpio_cfg();
 
+	/* configure the front phy's prstcfg and take it out of reset */
+	qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prst(ETH_FRONT_PHY_RST, false, false);
+
+	/* set the ZL30343 prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable the WD on it */
+	qrio_wdmask(ZL30343_RST, true);
+
+	/* set the QSFPs' prstcfg to reset at power-up and unit rst only */
+	qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST);
+	qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST);
+
+	/* and enable the WD on them */
+	qrio_wdmask(QSFP1_RST, true);
+	qrio_wdmask(QSFP2_RST, true);
+
 	return 0;
 }
 
 #define NUM_SRDS_BANKS	2
-#define PHY_RST		15
 
 int misc_init_r(void)
 {
@@ -157,9 +180,6 @@
 		}
 	}
 
-	/* take the mgmt eth phy out of reset */
-	qrio_prst(PHY_RST, false, false);
-
 	return 0;
 }
 
@@ -172,6 +192,7 @@
 #endif
 
 #if defined(CONFIG_LAST_STAGE_INIT)
+
 int last_stage_init(void)
 {
 #if defined(CONFIG_KMCOGE4)
@@ -187,6 +208,7 @@
 	}
 #endif
 	set_km_env();
+
 	return 0;
 }
 #endif
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
index 720e225..afede99 100644
--- a/board/keymile/kmp204x/kmp204x.h
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -20,6 +20,7 @@
 #define PRSTCFG_POWUP_RST		0x3
 
 void qrio_prst(u8 bit, bool en, bool wden);
+void qrio_wdmask(u8 bit, bool wden);
 void qrio_prstcfg(u8 bit, u8 mode);
 void qrio_set_leds(void);
 void qrio_enable_app_buffer(void);
diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c
index a484eb5..2b0b054 100644
--- a/board/keymile/kmp204x/pci.c
+++ b/board/keymile/kmp204x/pci.c
@@ -94,20 +94,23 @@
 }
 
 #define PCIE_SW_RST	14
-#define PEXHC_SW_RST	13
-#define HOOPER_SW_RST	12
+#define PEXHC_RST	13
+#define HOOPER_RST	12
 
 void pci_init_board(void)
 {
-	/* first wait for the PCIe FPGA to be configured
+	qrio_prstcfg(PCIE_SW_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(PEXHC_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(HOOPER_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+
+	/* wait for the PCIe FPGA to be configured
 	 * it has been triggered earlier in board_early_init_r */
-	int ret = wait_for_fpga_config();
-	if (ret)
+	if (wait_for_fpga_config())
 		printf("error finishing PCIe FPGA config\n");
 
 	qrio_prst(PCIE_SW_RST, false, false);
-	qrio_prst(PEXHC_SW_RST, false, false);
-	qrio_prst(HOOPER_SW_RST, false, false);
+	qrio_prst(PEXHC_RST, false, false);
+	qrio_prst(HOOPER_RST, false, false);
 	/* Hooper is not direcly PCIe capable */
 	mdelay(50);
 
diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c
index 08d5ca4..b6ba93a 100644
--- a/board/keymile/kmp204x/qrio.c
+++ b/board/keymile/kmp204x/qrio.c
@@ -91,7 +91,7 @@
 
 #define WDMASK_OFF	0x16
 
-static void qrio_wdmask(u8 bit, bool wden)
+void qrio_wdmask(u8 bit, bool wden)
 {
 	u16 wdmask;
 	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;